If Your Roof
Insulation Is Wet Across Large Areas
Soaked material under the panels keeps rotting and rusting under any coating laid over it.
Start WithWet Material Removal
Sheet 09 · About
About Our Easton Metal Roof Coating Work
How a Roof Walk Turns Into a Coating Plan
This is about our Easton metal roof coating work and the order we keep on every roof: walk it, repair it, then coat what is ready.
OrderWalk, repair, coat
BuildingsCommercial roofs only
Our Approach
The Short Version About Our Easton Metal Roof Coating Work
Most questions about our Easton metal roof coating work come back to what happens before any coating goes on. We walk the whole roof and mark every loose screw, open lap, rust spot, and cracked flashing.
Those details get repaired first, the surface gets washed and primed, and only then does coating go down at the thickness the product calls for.
- A written list of every repair
- Screws and laps fixed first
- Coating thickness measured
- Commercial buildings only
Old Coating Lifting at the Seams?
Peeling coating often hides rust or moisture. Tell us where it is lifting and we will check what is underneath.
What To Have Ready
- Where the coating peels
- When it was applied, if known
- Leaks below those spots
- Rough roof size
Roof Walk
What We Record on Every Roof Walk
Whatever system the roof ends up with, these items go on the inspection sheet.
- Loose, stripped, or rusted screws
- Open side laps and end laps
- Rust depth at eaves and laps
- Flashing at curbs and penetrations
- Outlets, gutters, and low spots
- Old coatings and their grip
- Wet insulation or decking
- Equipment and service paths
Straight Answers
Where We Point You Somewhere Other Than Coating
A coating covers the roof as it stands. These are the cases where we start with something else.
If Your Roof
Leaks Turn Out to Be Condensation
Moisture forming inside on cold steel calls for ventilation or insulation work, separate from the roof surface.
Start WithInterior Moisture Review
If Your Roof
Water Pools Because the Deck Sags
Structure that bends under load needs an engineer before any roofing work goes on.
Start WithStructural Review
If Your Roof
Panels Have Rusted Through Widely
Once holes run across the field, new metal is the honest recommendation.
Start WithRoof Replacement
Start a Conversation About Our Easton Metal Roof Coating Work
Call or request a ballpark range. We will walk the roof and tell you plainly what it needs.